Over time, acrylic bathtubs and jacuzzis become dull, yellowed and covered in fine scratches because of limescale, soap and harsh cleaning products. In most cases there is no need to remove and replace the tub: polishing the surface delivers the same result in much less time and at a much lower cost, without touching the bathroom tiles. We polish bathtubs in hotel rooms, spa centers and homes across Antalya, Mersin, Adana and Muğla.
What do we do during bathtub polishing?
- Limescale and soap layer: Limescale and soap residue stuck to the surface are dissolved without damaging the acrylic.
- Yellowing removal: The yellowed top layer is removed with fine sandpaper and polishing compounds.
- Scratch removal: Fine scratches disappear with gradual polishing.
- Crack and chip repair: Small cracks and chips are repaired with acrylic filler.
- Polishing and protection: The surface is brought to a high gloss and sealed with a protective coating.
- Silicone renewal: Moldy silicone along the edge of the bathtub can be removed and replaced.
Surfaces we polish
- Acrylic bathtubs: Standard bathtubs in residential and hotel bathrooms.
- Jacuzzis: Whirlpool tubs in hotel suites and villas.
- Shower trays: Acrylic and composite shower bases.
- Spa pools: Acrylic hydromassage pools and tubs.
How do we work?
- Inspection: We examine the bathtub's material and any yellowing or scratches, and give you the price on the spot.
- Protection: We tape off the faucet, tiles, and floor.
- Cleaning and repair: We dissolve limescale and fill in cracks.
- Polishing: We work the surface gradually with sandpaper and polishing compounds.
- Protection and handover: We apply a protective polish and make the bathtub available for use right away.
Polishing a bathtub is usually finished in a few hours; it can be used the same day.
Bulk bathtub refurbishment for hotels
In hotels with hundreds of rooms, replacing bathtubs is expensive and takes rooms out of sale for a long time. Refurbishment by polishing solves both problems.
- Room-by-room planning: We work through vacated rooms in sequence.
- Short turnaround: A room's bathtub is ready to go back on sale the same day.
- Low cost: Much more economical than replacement, with no demolition or renovation work.
Bathtub polishing in Antalya, Mersin, Adana and Muğla
In Antalya and Muğla, we carry out pre-season bulk bathtub and jacuzzi refurbishment for hotels, and in Mersin and Adana we polish individual bathtubs in homes and spa centers. If the marble or natural stone countertops in the bathroom are also worn, we can restore them during the same visit.
Pricing and quotes
Bathtub polishing is priced per unit; for bulk jobs in hotels, the unit price drops. Inspection is free of charge.
- Bathtub type: Jacuzzis take longer than standard bathtubs.
- Surface condition: Deep yellowing and scratches require an additional polishing stage.
- Repair: Crack and chip repair is calculated separately.
- Quantity: We offer special pricing for bulk jobs.
Warranty and handover
Our condition for handover is an even shine across the entire surface, with no trace of yellowing. If you notice a problem after handover, we will come back and fix it on site.
Frequently asked questions
01Can every bathtub be restored by polishing?
02How shiny will the bathtub stay after polishing?
03Is the bathtub removed?
Contact us for an assessment and a quote
Contact us for bathtub and jacuzzi polishing services across Antalya, Mersin, Adana, and Muğla. Service Request FormYou can fill out the or call us via our contact page.
