Handmade tile, with its glazed surface and hand-painted patterns, is a special material that adds value to any space. Tile walls in hotel restaurants, hammam and fountain panels, and kitchen backsplashes become covered with grease, limescale, and soot over time; the grout darkens and some pieces crack. The main goal with tiles is to protect the glaze: once the glaze is worn away, it cannot be restored. That is why tile treatment is very different from floor polishing: it relies mainly on chemical cleaning and is a highly controlled process. We work on tile surfaces throughout Antalya, Mersin, Adana, and Muğla.
What do we do in tile maintenance?
- Glaze-safe cleaning: Grease, soot, and dirt are dissolved with neutral, specialized cleaners that do not harm the glaze.
- Limescale removal: The limescale layer on hammam and fountain tiles is softened and removed in a controlled manner.
- Grout renewal: Darkened, moldy, and crumbling grout is cleaned out and refilled in a suitable color.
- Crack and break repair: Broken pieces are glued back, and small chips are completed with filler matching the color tone.
- Polishing unglazed tile: On unglazed or worn floor tiles, the surface is leveled using very fine diamonds.
- Protection: Grout and unglazed areas are sealed with a protective coating.
Tile surfaces we work on
- Hotel and restaurant walls: Tile cladding in buffet areas, lobbies, and restaurants.
- Hammam and fountain panels: Tile panels worn by limescale and moisture.
- Kitchen backsplashes: Decorative ceramics covered with grease and soot.
- Facade and garden: Outdoor tile decorations and ablution fountains.
How do we work?
- Inspection: We check whether the tile is glazed or unglazed, the type of dirt, and the condition of the grout joints.
- Test: We test the cleaner on a small, inconspicuous area.
- Cleaning: We clean the surface section by section with soft pads and suitable chemicals.
- Grout and repair: We renew the grout and fill in any chips or cracks.
- Protection and handover: We apply a protective sealant and explain our care recommendations.
What not to do with tiles
The most lasting damage to tiles is often caused by improper cleaning.
- Abrasive powders and wire brushes: They scratch the glaze and permanently remove its shine.
- Hydrochloric acid (muriatic acid) and strong acids: They burn the grout and fade some dyes.
- High-pressure water: It can dislodge loose pieces.
Tile care in Antalya, Mersin, Adana and Muğla
We clean and maintain tiled surfaces in hotel restaurants and hammams in Antalya and Muğla, as well as in historic buildings and homes in Mersin and Adana. We schedule hotel jobs in the off-season or during night shifts so that operations are not disrupted.
Pricing and quotes
Tile care is priced per square meter or per panel. The site survey is free of charge.
- Type of dirt: Grease, soot and limescale require different amounts of time and different materials.
- Grout: Whether the grout needs to be renewed.
- Repair: The number of broken and detached pieces.
- Access: Whether scaffolding is needed for high walls.
Warranty and delivery
Our condition for delivery is that the finish is undamaged and the grout lines are the same color throughout. If you notice any problem after delivery, we will come back and fix it on site.
Frequently asked questions
01Will dulled tile glaze shine again?
02Can the grout color be changed?
03How should tiles be cleaned day to day?
Contact us for a site survey and a quote
We offer free on-site surveys for tile cleaning and maintenance throughout Antalya, Mersin, Adana, and Muğla. Service Request FormYou can fill out the contact us through our contact page .
